Adjusting the thickness of a milk tablet press usually involves the following steps, but the specific operation may vary depending on different models and brands of machines. The following are general adjustment methods:

1. * * Read the instruction manual * *: Firstly, carefully read the user manual of the tablet press to understand how to adjust the thickness and the specific operating steps of the machine.

2. Shutdown adjustment:

-Ensure that the tablet press has completely stopped running.

-Open the adjustment cover of the tablet press or access the adjustment panel.

3. Adjust the punching die:

-Adjusting the distance of the punching die can control the thickness of the nipple. Usually, this involves adjusting the up and down position of the die.

-Loosen the screws or bolts that secure the die.

-Move the punch up or down as needed to increase or decrease the thickness of the nipple.

-After adjustment, re fix the screws or bolts to ensure that the die is firmly fixed.

4. Use the adjusting handwheel:

-Some tablet presses are equipped with adjustable handwheels, which can be rotated to fine tune the distance between the dies.

-Clockwise rotation usually increases thickness, while counterclockwise rotation decreases thickness.

5. Test tablet:

-After completing the initial adjustment, start the machine for trial tablet pressing.

-Check if the thickness of the nipple meets the expected level. If it does not, it needs to be fine tuned again.

6. Calibration and fine-tuning:

-Based on the results of the compression test, perform necessary calibration and fine-tuning until the thickness of the milk tablets fully meets the requirements.

7. Record settings:

-Once the appropriate settings are found, record these parameters for quick adjustment during the next production.

When making adjustments, please be sure to pay attention to the following points:

-Before operating the machine, ensure that the power has been turned off and necessary safety measures have been taken.

-When adjusting, the action should be slow and stable to avoid sudden and drastic adjustments that may cause damage to the machine.

-Regularly maintain and inspect the machine to ensure the accuracy of adjusting components and the normal operation of the machine.

If unsure how to operate, it is recommended to contact the manufacturer or professional technical personnel of the tablet press for guidance.